One of the things that we need to pay attention is our electric water heater at home. After the installation, you need to do a couple of things to ensure a quality performance. If the appliance is acting up, better consult a repairman to fix the problem; otherwise, it can totally break down.
If you’ve never checked the status of the heater, better read the following steps to maintain this appliance:
Unplug the device
We all know that the electric water heater is an improved version of the gas system. This is easy to use, install and is safe. Unlike the gas version, this one uses electricity to function. You don’t need to worry about the leak but you still need to perform a regular maintenance.
You can maintain the unit by unplugging the device. If you don’t do this, the appliance will be in standby mode to boil the water. Give it a rest once in a whilst, especially if you’re travelling for more than a week.
Clean the plumbing joints
The water, being heated by the machine, isn’t 100% clean. There are small particles present here which can be filtered by the valve. Over the years, the debris can block the passage of water, giving the machine a hard time to function.
Now, to prevent clogging, you must inspect the valve every six months and check if there’s an unusual corrosion. If you know a trusted plumber, you can let them work on this.
Replace the unit
Some appliances are made to last a particular time. Some units can only function for 15 years whilst others can be extended for 20 years. After that, the machine will start to act up.
No amount of maintenance and repair is needed to bring back the old performance of this machine.
If this is the case, better upgrade to a newer version of a water heater. Check out 1st Choice Hot Water to find the superior quality of electric water heaters in the market.